Hobs · Dulwich
Hob repairs in Dulwich
Quick answer
We repair induction, ceramic, solid-plate and gas hobs in Dulwich and nearby. Gas hob work is carried out by Gas Safe registered engineers. Induction boards, ceramic elements, touch controls and ignition faults are all repairable.
Updated November 2026 · 0208 462 6073
Each hob type fails in its own way. Induction hobs report problems with codes, ceramic zones burn out one at a time, and gas hobs usually suffer from ignition or flame safety faults.
Tell us the type, which zone or burner is affected, and exactly what the display shows. A photo of the controls helps if you can't find the model number.
What’s it doing?
Tap a symptom to see the usual cause.
Zone stays cold
Element, induction coil or power board.
Touch controls dead
Child lock, moisture or touch board.
Code flashing
Overheating, supply or board fault.
Pan not recognised
Unsuitable pan, coil or board (induction).
Zone won't switch off
A relay or board stuck on: isolate the hob.
Burner clicks but won't light
Ignition electrode, spark generator or blocked burner (Gas Safe).
Flame dies when released
Thermocouple or flame supervision device (Gas Safe).
Cracked glass
Don't use the hob until the glass is replaced.
Switches itself off
Overheat protection or cooling fan.
Trips the electrics
Earth leakage from an element or board.
Before you call
- Hold the lock symbol for a few seconds to release a child lock.
- Dry the glass: water confuses touch controls.
- On induction, check a magnet sticks to the pan base.
- On gas, check the burner cap sits flat and dry.
Safety
Don't use cracked glass or a zone that won't switch off. If you smell gas, turn it off and call 0800 111 999.
Model number
Look under the hob, and on the manual or guarantee card.
Your brand, your area
Hob brands
Advice
More hob adviceCommon questions
Do I pay for a quote?
The engineer diagnoses the fault on the visit and agrees the repair price with you before any work is carried out.
What should I have ready?
The make and full model number, what the appliance is doing, any code on the display, and how we park and get in.
Can you repair integrated appliances?
Yes. Let us know it's built in when booking, so we allow time to remove and refit it safely.
What if it isn't worth repairing?
We'll tell you straight. If parts or labour would cost more than the appliance is worth, we'll say so before doing the work.
Get it fixed
Ring or book online with your appliance, its model and the symptoms. An engineer visits, finds the fault and confirms the cost before repairing.